top of page
Clean, intelligible sound is key when a speaker is addressing a crowd. d:screet� SC4098 Supercardioid Podium Microphones deliver high intelligibility. This combines controlled directionality with rejection of background noise. These microphones are designed around d:screet� Miniature Microphone Capsules and interference tube technology.

d:screet� SC4098 Supercardioid Podium Microphones are available with a MicroDot connector. This makes them suitable for a wireless setup. No more cables across the stage; simply connect the podium microphone with a wireless transmitter. Your stage setup is more flexible than ever.

d:screet� SC4098 Supercardioid Podium Microphones offer extraordinarily high speech intelligibility and clarity of voice. They provide linear, natural sound combined with an elegant visual look of Scandinavian design.

Outstanding audio quality
Wireless podium mic capability
Highly directional � very isolated
High rejection of radio frequency interference (Daily Hire Rate - See Below for More Information)

DPA Lectern / Podium Microphone HIRE

    • Directional pattern: Supercardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency range: 20 Hz - 20 kHz
    • Frequency range, �2 dB, 20 cm (7.9 in) 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz
    • Sensitivity, nominal, �3 dB at 1 kHz 16 mV/Pa; -36 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 ?Pa (max. 26 dB(A))
    • Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 71 dB(A)
    • Total harmonic distortion (THD): < 1% up to 125 dB SPL peak
    • Dynamic range: 15 cm (6 in): Typ. 100 dB
    • Max. SPL, peak before clipping: 15 cm (6 in): 134 dB
    • Output impedance: From MicroDot: 30 - 40 ?. From XLR connector or DAD6001 XLR Adapter: 100 ?
    • Minimum load impedance: 2 k?
    • Cable drive capability: Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
    • Output balance principle: Signal balanced with XLR connector og DAD6001 XLR Adapter
    • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
    • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems.
    • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR Adapter
    • Connector: XLR-M
    • Color:  45 cm (17.7 in): black
    • Weight: 45 cm (17.7 in): 88 grams (3.1 oz)
    • Microphone diameter: 10 mm (0.4 in)
    • Capsule diameter: 5.4 mm (0.21 in)
    • Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
    • Temperature range: -40�C to 45�C (-40�F to 113�F)
    • Relative humidity (RH): Up to 90%
  • This item is typically in stock with our supplier and ships within 1-5 Days, though product lead times may vary.

    Please contact us prior to ordering to confirm Availability

bottom of page