C SERIES C 68:4 The C 68:4 Delivers 4 - 1700 W at 4 OHMS, Making This Amplifier Powerful Enough for the Vast Majority of Demanding Installed Sound Applications. P0CPH-MKCP-2 The C 68:4 delivers 4 - 1700 W at 4 ohms, making this amplifier powerful enough for the vast majority of demanding installed sound applications. Packaged in a compact 2U chassis, the C 68:4 sets a new standard for high power in an installation-dedicated amplifier. C Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL -), which allows the output to be optimized for any loudSpeaker load" whether one massive subwoofer or a series of small 100/70 V loudSpeakers. VPL works in combination with adjustable input gain to achieve maximum Headroom regardless of input levels or output impedances. Every C Series is ready for the NomadLinkdeg. network right out of the box. With NomadLink, key amplifier parameters are displayed via DeviceControl software, and remote control of channel mutes and power on/off is managed efficiently under network control.
6,800 Watt 4-Channel Amplifier with NomadLink Network Monitoring
SKU: C684
$7,995.00Price
Most Items are In Stock with our Suppliers and can be delivered within 2~7 Business Days. We will notify you if there is any Back Order or Delays.
- General Number of amplifier channels 4 Peak total output all channels driven 6800 W Peak output voltage per channel 141 V Max output current per channel 24.5 Arms Max output power (all channels driven) 16 ohms 650 W 8 ohms 1200 W 4 ohms 1700 W 2 ohms 1200 W Hi-Z per ch. (all ch.deg.s driven): 70 Vrms / 100 V Peak 1600 W Max output power bridged 16 ohms 2400 W 8 ohms 3400 W 4 ohms 2400 W 2 ohms Not recommended 1 Bridged per ch.: 140 Vrms / 200 V Peak 3200 W Performance THD 20 Hz - 20 kHz at 1 W <0.1% THD at 1 kHz and 1 dB below clipping <0.05% Signal to Noise Ratio >112 dBA Channel separation (Crosstalk) at 1 kHz >70 dB Frequency response (1 W into 8 ohms) + 0 / -3 dB 6.8 Hz - 34 kHz Input impedance 20 kOhm Common Mode Rejection (CMR) >50 dB, 20 Hz - 20 kHz Output impedance @ 100 Hz 30 mOhm Gain, Sensitivity and Limiters VPL, selectable per ch 2 141, 118, 100, 85, 71, 59, 50, 42 V VPL, when bridged 2 3 282, 236, 200, 170, 142, 118, 100, 84 V Voltage Peak Limiter mode (per ch.) Hard / Soft Amplifier gain selectable (all channels)" rear-panel switches 3 23, 26, 29, 32, 35, 38, 41, 44 dB Default gain 35 dB Level adjustment (per channel) Front-panel potentiometer, 21 position detented from -inf to Connectors and Buttons Input connectors (per ch.) 3-pin Phoenix, electronically balanced Output connectors (per ch.) Barrier strip 2-pole screw terminals Output bridge mode A+B and/or C+D, inputs A and C are input source NomadLink network On board, 2 x RJ45 connectors IN and OUT Intelligent fans (on/off) Yes, depending on presence of output signal Power Individual switches on front panel Cooling Two fans, front-rear airflow, temperature controlled speed Front-panel user interface Common NomadLink Network; Power Average Limiter (PAL)5; Power on Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute Power Operating voltage, 230 V / 115 V nominal 130-265 V / 65 -135 V 4 Minimum power-up voltage, 230 V / 115 V 171 V / 85 V Power Average Limiter (PAL) 5 Yes Power Factor Correction (PFC) No Soft-start / Inrush Current Draw Yes / max. 5 A Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 20 A / NEMA 5-20P; C16:4: 15A/NEMA 5-15P Dimensions Dimensions W: 483 mm (19), H: 88 mm (2 U), D: 343 mm (13.5) Weight Weight 12 kg (26.4 lbs) Finish Finish Black painted steel chassis with gray painted steel front Approvals Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
- This item is typically in stock with our supplier and ships within 1-5 Days, though product lead times may vary.
Please contact us prior to ordering to confirm Availability