C SERIES C 5:4X The C 5:4X is a Versatile Four-Channel Amplifier, Delivering 4 - 125 W* at 4 OHMS, 8 OHMS, 16 OHMS or 70 VRMS; 250 W at 100 VRMS is Available in Bridge Mode. P0CPB-MKCP-2 The C 5:4X is a versatile four-channel amplifier, delivering 4 - 125 W* at 4 ohms, 8 ohms, 16 ohms or 70 Vrms; 250 W at 100 Vrms is available in bridge mode. The C 5:4X is one of four Cdeg.X models in the C Series, Each uniquely suited for a range of installed applications with relatively lower power output requirements. Cdeg.X models share most Features of the original (higher power) C Series models, and they share the same compact, lightweight 2U chassis. However, the Cdeg.X models are offered in both four- and eight-channel versions, offering even greater channel density and installation flexibility. Also, because the unique benefits of Class TDdeg. are more applicable at higher power levels, the Cdeg.X models employ a cost-efficient proprietary Class D output design. Other Features unique to Cdeg.X models include a universal power supply, selectable 35 Hz high-pass filter, and built-in GPIO control facilities. This amplifier is uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL -), which allows the output to be optimized for any loudSpeaker load" whether a single large subwoofer or a series of small 70 V loudSpeakers (100 V in bridge mode). VPL works in combination with adjustable input gain (adjustable in 2-channel blocks) to achieve maximum Headroom regardless of input levels or output impedances. Additionally a 35 Hz high pass filter may be inserted in Each 2-channel section. Every C Series amplifier is ready for the NomadLinkdeg. network right out of the box. With NomadLink, key amplifier parameters are displayed via DeviceControl software, and remote control of channel mutes and power on/off is under network control. GPIO facilities" provided exclusively on Cdeg.X models" allow access to key amplifier functions such as power on/off and fault reporting. * Maximum continuous output power, all 8 channels driven, VPL set at 100 V and Gain set at 32 dB.
500 Watt 4-Channel Amplifier with NomadLink Network Monitoring
SKU: C54X
$3,495.00Price
Most Items are In Stock with our Suppliers and can be delivered within 2~7 Business Days. We will notify you if there is any Back Order or Delays.
- General Number of amplifier channels 4 Peak total output all channels driven 500 W Peak output voltage per channel 100 V Max output current per channel 5.6 Arms Max output power (all channels driven) 16 ohms 125 W 8 ohms 125 W 4 ohms 125 W 2 ohms 60 W Hi-Z per ch. (all ch.deg.s driven): 70 Vrms / 100 V Peak 125 W Max output power bridged 16 ohms 250 W 8 ohms 250 W 4 ohms 125 W 2 ohms Not recommended 1 Bridged per ch.: 140 Vrms / 200 V Peak 250 W Performance THD 20 Hz - 20 kHz at 1 W <0.1% THD at 1 kHz and 1 dB below clipping <0.05% Signal to Noise Ratio >112 dBA Channel separation (Crosstalk) at 1 kHz >70 dB Frequency response (1 W into 8 ohms) + 0 / -3 dB 6.8 Hz - 34 kHz Input impedance 20 kOhm Common Mode Rejection (CMR) >50 dB, 20 Hz - 20 kHz Output impedance @ 100 Hz 48 mOhm Gain, Sensitivity and Limiters VPL, selectable per ch 2 100, 63, 45, 32 V VPL, when bridged 2 3 200, 126, 90, 64 V Voltage Peak Limiter mode (per ch.) Hard / Soft Amplifier gain selectable (all channels)" rear-panel switches 3 29, 32, 35, 38 dB Default gain 32 dB Level adjustment (per channel) Front-panel potentiometer, 21 position detented from -inf to Connectors and Buttons Input connectors (per ch.) 3-pin Phoenix, electronically balanced Output connectors (per ch.) Barrier strip 2-pole screw terminals Output bridge mode A+B, C+D, E+F, G+H, inputs A, C, E, G are signal source High pass filter Fixed at 35 Hz, switchable per channel NomadLink network On board, 2 x RJ45 connectors IN and OUT Intelligent fans (on/off) Yes, depending on presence of output signal Power Individual switches on front panel Cooling Two fans, front-rear airflow, temperature controlled speed General Purpose Outputs (GPO) Contact Closure types, 2-pole Phoenix General Purpose Inputs (GPI) Contact Closure types, 2-pole Phoenix Front-panel user interface Common NomadLink Network; Power Average Limiter (PAL)4; Power on Per channel Signal present / High-impedance; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute Power Operating voltage, 230 V / 115 V nominal Universal power supply 65-265 V Minimum power-up voltage, 230 V / 115 V 80 V Power Average Limiter (PAL) 4 Yes Power Factor Correction (PFC) Yes Soft-start / Inrush Current Draw Yes / max. 5 A Mains connector IEC inlet Dimensions Dimensions W: 483 mm (19), H: 88 mm (2 U), D: 343 mm (13.5) Weight Weight 8.5 kg (18.75 lbs) Finish Finish Black painted steel chassis with gray painted steel front Approvals Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
- This item is typically in stock with our supplier and ships within 1-5 Days, though product lead times may vary.
Please contact us prior to ordering to confirm Availability